Daido DCMX
Daido NAK80
Minkor
TENA STEEL
Toolox 33
Toolox 44
1.0570/ 1.0577
1.1730
1.2083
1.2311
1.2312
1.2343 ESU
1.2363
1.2379
1.2767
1.2842
1.7131
1.7225
 
1.2842

VarioPlan
1.2842 90 MnCrV 8

Product info Material info
Tolerances
  • Width: +0.2 / -0 mm
  • Thickness: +0.3 / -0 mm
  • Length: +0.2 / -0 mm
Sawn edges available:
  • Width: +4 / -0 mm
  • Length: +4 / -0 mm
Minimum dimension:
  • Width: 20 mm
  • Length: 20 mm
Maximum dimension:
  • Width: 500 mm
  • Length: 2100 mm

Calculation

Delivery time approx. 10 to 11 days ex works.
X
X
X
x x x

Please specify your chamfers:

Fasen Quader
x 45°
x 45°
x 45°

Please specify your radiuses:

fase
The value in the radius field is invalid. Maximum radius is 30 mm
The value in the inset field is invalid. Maximum inset is 1 mm
The value in the side chamfer field is invalid. The minimum chamfer on the side is 0.1 mm
The value in the chamfers side field is invalid. Maximum chamfers side is 5 mm
Maximum chamfers top is 5 mm
Minimum chamfers top is 0.1 mm
Maximum chamfers bottom is 5 mm
Minimum chamfers bottom is 0.1 mm
Standard function (radius) only supported up to a thickness of 110,00 mm.
Standard function (side chamfer) only supported up to a thickness of 110,00 mm.
The maximum thickness is 70.3 mm!
The minimum thickness is 10 mm!
The maximum width is 500 mm!
The minimum width is 20 mm!
The maximum length is 2100 mm!
The minimum length is 20 mm!
Please check your entries or the marking of the corners.
Length value has to be higher than width value
For best results, use the smallest value as the thickness, the middle value as the width, and the largest value as the length. Werte neu anordnen.
You must select ‚milled‘ as edge machining to be able to select chamfers.
You must select ‚milled‘ as edge machining to be able to select a radius.
With parts having a width of < 70 mm, the maximum length is 460 mm.
The maximum width is  mm for parts having a thickness >  mm.

Schematic illustration of chamfer, radiuses and clearance:

A
 
B
fase
Chamfers
Length: mm
Width: mm
radius
Radius and Clearance
D
 
C
Product info Material info

Downloads

1.2842 90 MnCrV 8

Cold work tool steel for the manufacture of tools, measuring instruments, devices, templates, guide bars and components of all kind

VarioPlan

Fine-finished tool steel sheets cut to size, optional widths and lengths

Attention please!

Some features of our webshop are not supported by your current browser version.
We recommend updating your browser or using a different browser.