1.7131 16 MnCr 5

  • Width: +0.2 / -0 mm
  • Thickness: +0.3 / -0 mm
  • Length: +0.2 / -0 mm
Sawn edges available:
  • Width: +4 / -0 mm
  • Length: +4 / -0 mm
Minimum dimension:
  • Width: 20 mm
  • Length: 20 mm
Maximum dimension:
  • Width: 960 mm
  • Length: 2100 mm


x x x

Please specify your chamfers:

Fasen Quader
x 45°
x 45°
x 45°

Please specify your radiuses:

The value in the radius field is invalid. Maximum radius is 30 mm
The value in the inset field is invalid. Maximum inset is 1 mm
The value in the side chamfer field is invalid. The minimum chamfer on the side is 0.1 mm
The value in the chamfers side field is invalid. Maximum chamfers side is 5 mm
Maximum chamfers top is 5 mm
Minimum chamfers top is 0.1 mm
Maximum chamfers bottom is 5 mm
Minimum chamfers bottom is 0.1 mm
Standard function (radius) only supported up to a thickness of 110,00 mm.
Standard function (side chamfer) only supported up to a thickness of 110,00 mm.
The maximum thickness is 136.3 mm!
The minimum thickness is 10 mm!
The maximum width is 960 mm!
The minimum width is 20 mm!
The maximum length is 2100 mm!
The minimum length is 20 mm!
Please check your entries or the marking of the corners.
Length value has to be higher than width value
Your chosen Varioplan can possibly be produced cheaper, if you change your dimensions. Chose the smallest dimension as thickness, the medium dimension as width and the largest dimension as length. Switch dimensions to recommended format
You must select ‚milled‘ as edge machining to be able to select chamfers.
You must select ‚milled‘ as edge machining to be able to select a radius.
With parts having a width of < 70 mm, the maximum length is 460 mm.
The maximum width is  mm for parts having a thickness >  mm.

Schematic illustration of chamfer, radiuses and clearance:

Length: mm
Width: mm
Radius and Clearance
back to product back to material


1.7131 16 MnCr 5

Case hardening steel for the production of high-strength and components resistant to wear of all types


Fine-finished tool steel sheets cut to size, optional widths and lengths

Attention please!

Some features of our webshop are not supported by your current browser version.
We recommend updating your browser or using a different browser.